100,000+ parking spaces across EuropeHot-dip galvanised · Made in AustriaDelivery in 7–10 working daysLockable with any padlock
Rollerstop
Planner portal

Foundation & installation

Foundation plan for floor stands set in concrete and all installation instructions for the RS and eS series.

Foundation plan

For floor stands for setting in concrete (RS: BOB46 and TBOB46, eS: BOB60 and TBOB60), each stand gets its own foundation. The square tube (40 × 40 mm) is embedded approx. 20 cm, leaving approx. 10 cm of concrete below.

Foundation per floor stand for setting in concrete
20 × 20 × 30 cm (W × L × D), embedment depth approx. 20 cm
Dead weight
approx. 28 kg of concrete (approx. 12 litres)
Concrete
C20/25 or rapid‑set concrete (approx. 1 bag of 25 kg)
Outdoors
frost‑proof foundation via foundation depth or a gravel bed
Section: floor stand for setting in concrete in a single foundation20 cm30 cm20 cm1234
  1. 1Ground level
  2. 2Foundation C20/25
  3. 3Floor stand for setting in concrete (square tube 40 × 40 mm, embedment approx. 20 cm)
  4. 4frost‑proof: foundation depth or gravel bed

Installation instructions

The instructions apply regardless of the module: series and mounting are what matter.

RS · In one row, single-sided

RS · In one row, double-sided

eS · In one row, single-sided

eS · In one row, double-sided

Watch installation videos

Cart

Your cart is empty.

View products